Seasoning is the most important thing you can do to your wok. Only carbon steel and iron woks need to be seasoned. The purpose of seasoning is to remove the manufacturer's protective coating and coat it with a thin layer of oil. This creates a smooth cooking surface which enables food to shift and glide easily, thus preventing your food from sticking, discoloring, and picking up a metallic taste.
The initial step is to scrub it thoroughly. Take a steel wool scouring pad and scrub both the inside and outside of the wok with soap. This will remove the anti-rust coating that comes with most woks. If your new wok comes with some rust spots, don't worry. It is completely normal for unseasoned woks to develop some minor rust. Just make sure that you scrub out the rust before you move on. Rinse it thoroughly with hot water. Then, to make sure that you remove all the coating, set the wok on the stove, fill it with water, and boil it for 5 to 10 minutes to dissolve the remaining coating. Pour out the water and scrub the surface again with steel wool scouring pad and soap. New woks may cause a slight metallic taste to the first two or three dishes that are cooked in it, but after that, the metallic taste will disappear.
Carbon Steel Wok
Reminder: the steel wool scouring pad is only to be used in this initial step prior to seasoning your new wok. Do NOT use a steel wool scouring pad on a seasoned wok, EVER! It will waste all the effort you put forth in seasoning your wok, and will require you to re-season it again.
Next, place the wok on the stove over high heat. You're ready for the next step when you sprinkle a few drops of water into the wok and they start to dance around the bottom. Then, roll up a few sheets of paper towel, or use a piece of cloth, and dip it in cooking oil. Peanut oil or corn oil are preferred because of their high smoking point, thus minimizing smoke fumes when you are seasoning the wok.. Naturally, turning on your stove top vent will help reduce the fumes, too. Using a pair of long wooden chopsticks, or tongs, wipe the soaked paper towel over the entire inner surface of the wok. Reduce the heat down to low, and let the wok sit for 15 minutes. This allows the wok to absorb the oil. If the surface begins to dry off, then wipe the wok again with the soaked paper towel. You want the wok to obtain a thin film of oil when it's seasoned. The bottom of the wok should be slightly brown. Repeat the above steps two more time, and the bottom should darken even more. Over time, the entire wok will turn black (that's good). Now the wok is ready to go.
But we're not nearly done. Ever wonder why Chinese restaurant dishes produce that mouth-watering aroma when they are served on your table? And ever wonder why you can't quite match that flagrant flavor when you try to cook Chinese food at home? They come from cooking food on an almost impervious shiny black coating in a well-seasoned wok. That black coating is called "patina", which is essentially harmless carbon residue from cooking in a wok repeatedly on high heat. A well-seasoned wok cooking at a high heat will impart what Chinese chefs lovingly call "wok hay". Its literal translation is "breath of wok". Wok hay is so revered in Chinese culinary tradition that in China , especially in the Canton region (south), when a customer is served stir fry dish without wok hay, it is considered an insult or bad luck.
It takes time, care, and regular use before a wok develops a patina. There are no shortcuts. But having patina on your wok is still not enough produce wok hay on your dishes. It is imperative that you heat the wok on high heat to the point where you see some faint smoke coming from the bottom before you add cold cooking oil. The cold cooking oil cools down the wok slightly, and makes the food taste tenderer once it's done. If the wok is not hot enough, or cold (gasp!) when you pour in the cooking oil, the ingredients will stick to the wok (even with the patina) and inevitably burn, also leaving the ingredients raw inside. Not to mention you lose that coveted "wok hay".
In Part 4, we will talk about cleaning and caring for you wok.
Special Price!!! Cuisinart Chef's Classic Stainless 14-Inch Stir-Fry Pan with Helper Handle and Glass Cover
Oct 20, 2011 19:15:47
Click for larger image and other views
Cuisinart Chef's Classic Stainless 14-Inch Stir-Fry Pan with Helper Handle and Glass Cover Feature
- 14-inch stir-fry pan made of 18/10 stainless steel with encapsulated aluminum core
- Stay-cool riveted handle and opposite helper handle for a secure hold
- See-through glass cover with loop handle and stainless-steel rim
- Dishwasher-safe for quick cleanup; oven-safe up to 550 degrees F
- Measures approximately 14-2/7 by 21-1/2 by 5-1/2 inches; limited lifetime warranty
Cuisinart Chef's Classic Stainless 14-Inch Stir-Fry Pan with Helper Handle and Glass Cover Overview
Cuisinart is pleased to offer an exciting new variety of specialty pieces of Chef's Classic Stainless Cookware that make everyday cooking tasks a pleasure.SAVE NOW on the special offers below!
Available In Stock. |
| This Cuisinart Chef's Classic Stainless 14-Inch Stir-Fry Pan with Helper Handle and Glass Cover ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
